- RF Cables
-
RF Connectors
- VNA CAL KIT
-
RF Adapters
- 2.92mm
- 3.5mm
- 4.3/10 to N, 716
- BNC - UHF
- In series BNC
- In series DIN 716
- In series N type
- In series RP-SMA
- In series SMA
- In series TNC
- In series UHF
- N Type - BNC
- N Type - DIN716
- N type - F adapter
- N type - MCX
- N type - RP-SMA /
- N Type - SMA
- N type - SMB
- N Type - TNC
- N Type - UHF
- RP-SMA / RP-TNC
- SMA - F adapter
- SMA - RP-SMA
- SMA / BNC Adapter
- SMA / TNC adapters
- SMA / UHF adapters
- TNC / RP-SMA / BNC
- K 2.92mm
- 3.5mm
- N type
- SMA
- TNC
- 7/16 DIN
- BNC
- FME
- F
- MCX
- SMB
- UHF
- RF Terminations
- RF Attenuators
- Circulators & Isolators
- Lightning Protectors
-
RF Cables
-
RF Connectors
- VNA CAL KIT
-
RF Adapters
- 2.92mm
- 3.5mm
- 4.3/10 to N, 716
- BNC - UHF
- In series BNC
- In series DIN 716
- In series N type
- In series RP-SMA
- In series SMA
- In series TNC
- In series UHF
- N Type - BNC
- N Type - DIN716
- N type - F adapter
- N type - MCX
- N type - RP-SMA /
- N Type - SMA
- N type - SMB
- N Type - TNC
- N Type - UHF
- RP-SMA / RP-TNC
- SMA - F adapter
- SMA - RP-SMA
- SMA / BNC Adapter
- SMA / TNC adapters
- SMA / UHF adapters
- TNC / RP-SMA / BNC
- K 2.92mm
- 3.5mm
- N type
- SMA
- TNC
- 7/16 DIN
- BNC
- FME
- F
- MCX
- SMB
- UHF
-
RF Terminations
-
RF Attenuators
-
Circulators & Isolators
-
Lightning Protectors
UHF PL259 Connector Crimp Plug for RG58 cable 50ohm
High Quality Teflon Insulator.
MATERIAL & PLATING
shell...................brass......................nickel plated
contact pin..........brass......................gold plated
elastic contact......beryllium.................gold plated
socket.................beryllium or tin brass??gold plated
insulator PTFE
crimping suite........copper alloy.............nicked or gold plated
Manufacture: MGR
PL259 Plug Fitting Instructions
1. Cut back (black) outer insulation 30mm - Cut back braid leaving 6mm - Cut back centre core insulation leaving 10mm
2. Fold back remaining braid over the the outside of the 'black' outer insulation - Twist centre wire so that no strands of wire are loose
3. Insert the cable into the plug and screw the braid into the threaded section at the rear of the plug
4. Solder the centre core wire at the tip and cut off excess
rnRG58CU-CABLE
Weight | 0.03 kg |